G&G pinion gear for original motor

Material: Dupont Zytel High Performance Reinforced Polymer
Dimension: 53 x 32 x 112 mm (without packaging)
Weight: 78g
More vertical compact grip angle with improved ergonomics
Aggressive 360° texturing to increase surface traction but strategically panelled with comfort in mind

KP13 green gas magazine, compatible with Kjw and Evolution

capacity 22bb

The Firefield BattleTek Flashlight with green laser (FF25018) is ideal for quick target acquisition and combat simulations while in low-light situations.

BattleTek sights are compact and crafted out of a lightweight, durable glass filled nylon material and are IP55 rated water resistant, shockproof and able to stand up to a max caliber of .308.

Also features a 150-lumen LED light with a strobe setting and a 5mw green laser, with a range of up to 50 yards of visibility during the day or 600 yards at night.

Lipo Graphene battery, very high performance with 130c discharge

Voltage: 11.1 Volt
Capacity: 1'500 mAh / 65 C
Charging current (max.): 1.5 A
Discharge current (max.): 97.5 A
Watthour: 16.7 Wh
Dimension: 86x35x20 mm
Weight: 120 g
Shipping weight: 140 g

not suitable for mosfet-free replicas, please make sure your ASG is suitable for these batteries

Lipo Graphene battery, very high performance with 130c discharge

Voltage: 11.1 Volt
Capacity: 1'000 mAh / 65 C
Charging current (max.): 1.0 A
Discharge current (max.): 65.0 A
Watthour: 11.1 Wh
Dimension: 66x35x17 mm
Weight: 90 g
Shipping weight: 110 g

not suitable for mosfet-free replicas, please make sure your ASG is suitable for these batteries

Lipo Graphene battery, very high performance with 130c discharge

Voltage: 7.4 Volt (2 Cells)
Capacity: 1'300 mAh / 65 C
Charging current (max.): 1.3 A
Discharge current (max.): 84.5 A
Watthour: 9.6 Wh
Dimension: 66x35x15 mm
Weight: 80 g
Shipping weight: 90 g

not suitable for mosfet-free replicas, please make sure your ASG is suitable for these batteries

Lipo Graphene battery, very high performance with 130c discharge

Voltage: 7.4 Volt (2 Cells)
Capacity: 1'800 mAh / 65 C
Charging current (max.): 1.8 A
Discharge current (max.): 117.0 A
Watthour: 13.3 Wh
Dimension: 86x35x16 mm
Weight: 990 g
Shipping weight: 120 g

not suitable for mosfet-free replicas, please make sure your ASG is suitable for these batteries

Lipo Graphene battery, very high performance with 130c discharge

Voltage: 7.4 Volt (2 Cells)
Capacity: 1'000 mAh / 65 C
Charging current (max.): 1.0 A
Discharge current (max.): 65.0 A
Watthour: 7.4 Wh
Dimension: 66x35x12 mm
Weight: 60 g
Shipping weight: 80 g

not suitable for mosfet-free replicas, please make sure your ASG is suitable for these batteries

Metal slide with fully licensed SIG SAUER laser etched trademarks made by VFC
    Optic ready slide with removable reflex sight plate
    Compatible with both CO2 and green gas (includes CO2 magazine)
    Field strippable with similar weight and balance to the real M17 handgun
    1:1 replica of the new US Army Modular Handgun System
    Refurbished models are 100% functioning models that were returned to Sig Sauer for repair and have passed all QC guidelines

Nozzle was changed, new and never used/sold to end customerDesigned for professional training, this high-end SIG AIR ProForce Airsoft pistol is a replica of the U.S. Army issued P320-M17 9mm pistol in look, balance, and handling characteristics and engineered to SIG standards for precision, accuracy, and reliability.

Metal slide with fully licensed SIG SAUER laser etched trademarks made by VFC
    Optic ready slide with removable reflex sight plate
    Compatible with both CO2 and green gas (includes CO2 magazine)
    Field strippable with similar weight and balance to the real M17 handgun
    1:1 replica of the new US Army Modular Handgun System
    Refurbished models are 100% functioning models that were returned to Sig Sauer for repair and have passed all QC guidelines

Nozzle was changed, new and never used/sold to end customerDesigned for professional training, this high-end SIG AIR ProForce Airsoft pistol is a replica of the U.S. Army issued P320-M17 9mm pistol in look, balance, and handling characteristics and engineered to SIG standards for precision, accuracy, and reliability.

Precision CNC machined all metal receiver w/ M-LOK handguard; fully licensed with deep engraved roll marks
    Accurate weight and feel to the real thing
    Barrel and handguard comes apart just like the real thing (allows easy access to battery compartment)
    Ambidextrous charging handle w/ realistic dual return springs; mock bolt locks back for easy access to hopup adjustment (functional bolt stop)
    Ambidextrous controls (selector, mag release)
    3 position telescoping PDW style stock
    VFC Avalon Gearbox featuring improved bearings, quick change spring system, built in MOSFET, and powered by high torque neodymium magnet motors;
    QD sling mounts on handguard, lower receiver, and stock

High speed motor suitable for airsoft guns with short shaft for ak type series guarantees low battery consumption and high performance, the components are definitely of high quality and also guarantee a long life

Pinioin gear Synthesis stainless steel  D type

MAGNUM Jump 2 boots black 5"

Amphibious Magnum model Jump 2 version 5 inches high, made to maximize shock absorption, increased breathability and in ρiυ 'it guarantees considerable lateral protection of the malleolus thanks to a protection applied in the structure of the boots;

amphibians particularly suitable for use in the military and aviation fields - launches, parachuting, but also perfect for those who are safe and stay up all day

MAIN FEATURES OF MAGNUM JUMP 2 5.0:

    All-round protection and comfort
    Padded ankles for added protection
    Breathable inner lining for moisture management and comfort
    EVA foam insole for shock absorption
    EVA midsole for maximum comfort
    TecTuff tip for increased durability and abrasion resistance
    High grip rubber sole
    Durable leather upper with durable breathable mesh
    Compartment - lace pocket integrated into the tongue

BLACK COLOUR

MAGNUM Jump 2 boots black 8 "

Amphibious Magnum model Jump 2 version 8 inches high, made to maximize shock absorption, increased breathability and in ρiυ 'it guarantees considerable lateral protection of the malleolus thanks to a protection applied in the structure of the boots;

amphibians particularly suitable for use in the military and aviation fields - launches, parachuting, but also perfect for those who are safe and stay up all day

MAIN FEATURES OF MAGNUM JUMP 2 8.0:

    All-round protection and comfort
    Padded ankles for added protection
    Breathable inner lining for moisture management and comfort
    EVA foam insole for shock absorption
    EVA midsole for maximum comfort
    TecTuff tip for increased durability and abrasion resistance
    High grip rubber sole
    Durable leather upper with durable breathable mesh
    Compartment - lace pocket integrated into the tongue

BLACK COLOUR

The Fenix AER-04 tactical remote switch is the perfect accessory for your rail mounted flashlight.

This remote switch allow you quickly select momentary on  with the pressure pad or constant on with the tactical switch.

Easily attach your remote switch either by cable ties or the hook and loop backer (both included). IP68 rated dustproof and waterproof underwater to 2 meters.

This remote switch only works with the following current Fenix Flashlight Models: TK30, TK22 V2.0, TK22 UE, and HT18.  (This switch does not fit the PD36R).

The Fenix ALG-05 tactical remote pressure switch mount is specially designed for Fenix AER series tactical remote pressure switches (remote pressure switches must be purchased separately). With a simple push, quickly and easily attach the mount to any standard Picatinny rail. This creates a secure hold for the AER pressure switch. The body of the mount is made of aluminum alloy with hard-anodized finish, and it is non-reflective with a matte black finish, making it better for tactical concealment.

AER Series remote switch is not included with this mount.

• Fits MIL-STD-1913 picatinny rails
• Made of A6061-T6 aluminum
• Premium type HAIII hard-anodized anti-abrasive finish

The Fenix E35 V3.0 flashlight has been upgraded with high-performance features in mind. This EDC flashlight can now blast a maximum 3000 lumens a distance of 787ft (240m).

Powered by an included 21700 (5000mAh) rechargeable Li-ion battery which not only allows this light to be extremely bright, but also has extended runtimes. Designed with ultrathin optical lens, the E35 V3.0 flashlight creates a soft and balanced beam.

Convenient side switch activates all lighting modes and includes a battery level indicator. It’s hard to beat a 3000 lumen flashlight in a pint-sized light. Waterproof and dustproof, the Fenix E35 V3.0 is built to withstand the elements. Incredibly bright in a compact size makes this flashlight an everyday carry powerhouse. 

THIS LIGHT DOES NOT HAVE A TAIL-SWITCH.

The Fenix E12 V2.0 AA Flashlight emits an impressive maximum 160 lumens from an included single AA battery. Using an ultra-thin optical lens, this flashlight delivers a soft and balanced beam a max distance of 223ft (68m).

Access three brightness levels with a tap of the tail switch. At only 3” long, this flashlight is a great everyday carry size, and with its two-position body clip, you can carry it as you want—even clip it to your hat and use it as a headlamp.

This little flashlight is built tough with an IP68 dustproof and waterproof rating. It’s hard to beat the ease of powering your flashlight with one single AA battery. Super small and bright, the Fenix E12 V2.0 is a great upgrade for those looking for a AA powered EDC flashlight.

The Fenix LD32 UVC is a flashlight with a UVC disinfecting light built-in. Simply remove the protective cover and press the two side switches to activate. Scan any surface with the UVC light, at a distance of less than an inch, to kill up to 99% of germs and bacteria.

Powered by a single included 18650 Li-ion battery, the multifunctional Fenix LD32 UVC emits its standard beam at a maximum 1200 lumens and to a distance of up to 558 feet. A great every day carry size, the Fenix LD32 UVC flashlight is the perfect companion to help guard you against the daily dangers you may encounter—day or night.

The Fenix TK11 TAC is a flashlight designed with the tactical user in mind.  The flashlight’s two operating modes were designed to support the law enforcement and security markets specifically. The unique design features a toggle tail switch which allows you to quickly switch between Tactical Mode, which limits the light to only the highest brightness level and strobe for tactical situations, or Duty Mode which accesses all lighting modes for on-duty demands.

Powered by a 18650 battery or disposable CR123As (no batteries are included), this flashlight’s balanced beam can throw a maximum 1600 lumens a long reaching 1099ft (335m). Tough and reliable, the TK11 TAC is impact resistant and has an IP68 rating making it dustproof and waterproof.

The Full zip windstopper will be the most versatile set-up for your missions or simply to go to the gym. It adapts perfectly to climatic conditions varying between wind and temperature. The insulation from the outside is characterized by a RIPSTOP nylon layer, while a stretch fleece fabric has been inserted on the sides. Internal comfort is guaranteed by a micro fleece structure. The Windstopper is light and packable inside a lumbar pocket inserted in the jacket.

Data sheet

fleece lined
hips in anti-abrasion powerstretch fleece
and anti-pilling
pockets on sleeves with velcro pen holder
2 side pockets with internal caissons and buttonhole
pass cables
2 Napoleonic pockets on chest
inside pocket to close the garment
YKK double slider zip closure

How many times in the field I found myself in high voltage situations. How often, in those situations, my equipment and clothing didn’t support me 100%. How many times I have found myself thinking that I was stressed by the garment rather than supported and I would have realized it differently.
How many times I have found myself sharing those thoughts with colleagues, experienced operators who, like me, pointed out needs that the garmets we were provided with couldn't satisfy. How many lessons I have learned in the field, where a few moments can make a difference and where even a small detail of a garment can change the fate of an action.

We are operators, we are pragmatic people. So we decided to produce all this by owr own for us and for everyone like us.

And so 4-14 Factory was born, as a group with different skills:
those who have worked for decades in operational contexts and know what a professional needs; those who know how to study and research cutting-edge materials; those who know how to develop ideas and combine ambition and needs; who knows how to make it a production that is up to the task and finally who, during a mission, tries the product that arrives to you. All proudly Italian people. If I wasn’t ready to use it, you wouldn’t find it in 4-14 product guide.

The Rainwear Jacket is the outermost layer to wear during a storm. Also excellent as windproof, to facilitate adequate ventilation we have prepared two zippers under the sleeve. The adjustable hood with semi-rigid visor allows you to follow the movements of the head, it is also provided of a bag where you can store the garment properly in backpacks and bags.

Technical data sheet:

DWR fabric (80/10) with water resistance up to 10,000 columns of water

DWR 3 layers / 3 layers foldable in separate bag

2 front pockets

2 inside pockets

grommet slots 2 shoulder height pockets with velcro patch and pen loop

YKK vulcanized zips

How many times in the field I found myself in high voltage situations. How often, in those situations, my equipment and clothing didn’t support me 100%. How many times I have found myself thinking that I was stressed by the garment rather than supported and I would have realized it differently.
How many times I have found myself sharing those thoughts with colleagues, experienced operators who, like me, pointed out needs that the garmets we were provided with couldn't satisfy. How many lessons I have learned in the field, where a few moments can make a difference and where even a small detail of a garment can change the fate of an action.

We are operators, we are pragmatic people. So we decided to produce all this by owr own for us and for everyone like us.

And so 4-14 Factory was born, as a group with different skills:
those who have worked for decades in operational contexts and know what a professional needs; those who know how to study and research cutting-edge materials; those who know how to develop ideas and combine ambition and needs; who knows how to make it a production that is up to the task and finally who, during a mission, tries the product that arrives to you. All proudly Italian people. If I wasn’t ready to use it, you wouldn’t find it in 4-14 product guide.

Jing Gong High cap magazine G3 serues 500rds

Action Army was founded in Taiwan in 2010. It focuses on offering products such like airsoft sniper rifles, hi-precision inner barrels, AEG motors and gears, hop-up rubbers, GBB valves, BB’s and many more. Their main goal is to provide customer with high Taiwan quality in affordable price. If you are looking for great upgrade parts for your replica without paying a small fortune – Action Army



High quality replacement cylinder and stainless steel cylinder head for VSR series rifles. An ideal replacement if your original cylinder is worn or broken, or if you are looking to do an across-the-board upgrade to your rifle.
High quality upgrade cylinder and stainless steel cylinder head for VSR series rifles. An ideal replacement if your original cylinder is worn or broken, or if you are looking to do an across-the-board upgrade to your rifle.

You need to drill out the press-rivet in the original cylinder but do not need to install a new rivet on this upgrade version.

Ranger Grip 55 Autumn Spirit Special Edition 2019 Victorinox LIMITED EDITION
Main features

     The ideal companion with two cheeks in black and orange
     Large multi-purpose made in Switzerland with a paracord cord with olive green camouflage weave
     Limited edition of 10,000 pieces worldwide

Article No. 0.9563.C91
Height 22 mm
Length 130 mm
Weight 169 g

VICTORINOX MULTIPURPOSE KNIFE


SPORTSMAN

Multipurpose 85 mm with red Cellidor cheeks with cross and key ring.

Folding knife MFK-R ROSEWOOD

Brand: ALBAINOX 
Material: Zamak
Size: 12cm

mushroom knife

blade 7,5cm

Albainox 02157  butterfly knife

EXTREMA RATIO COL MOSCHIN BLACK

Made to order for the renowned 9th Parachute Assault Regiment “Col Moschin” of the Italian special forces, which officially adopted it in 2002, this is a quintessential combat knife

Ganzo G7452Р-WS model was designed for nature trips. It will be useful for fishermen, tourists and hunters. It is a folding knife and meets all demands for practical camping blade. It does not rust, easily sharpened and securely transported. Ganzo G7452Р-WS model has a pattern on cover plates – large textured mesh.

VICTORINOX HANDYMAN Multiuso da 91 mm con guance in Cellidor rosso con croce dotato di 23 funzioni. coltello multiuso

NEDDLE FIXED BLADE WITHARMOUR

The Needle is an economic tactical knife equipped with a full-tang blade made of steel with a high carbon content of 440C. The anti-slip handle in G10 keeps the knife light but at the same time resistant. Comes with an adjustable Kydex case for easy and safe transport.

ACCESSORY OF

AXEM4.0 - Machine for Survival

Brand: ALBAINOX
Material: Zamak
Size: 12cm

Opinel Inox N° 12

Victorinox Sportsman White Christmas Special Edition 2018

Limited Edition Collector's Item

Extrema ratio CONTACT Black

Extrema Ratio developed the first knife of a new production line, called CONTACT.

It has a blade with a lance-shaped profile, a flat grinding and a diamond-shaped geometry. It has got a lower guard branch to protect the hand from accidental cuts, upper jumping to improve grip, a concave fuller along the entire length of the blade and a generous thickness blade (6.30mm) All these details make the Contact the elder brother of the now famous Requiem, revisited in proportions and in some technical features. The first of a new line of multipurpose knives.

Pocket knife TACTICA RUI / K25

Gerber Kettlebell Grey Clip Pocket Folding Knife Dual Choil 3426

For knife users who carry every day, compact knives are often the preferred tool of choice. A smaller profile takes up less space in the pocket and draws less attention when pulled out for use. The Kettlebell folder features a rugged 7Cr17MoV blade, sturdy frame lock, and coined aluminum handle that is textured for secure grip.

Signal, A multi-tool designed for adventure with a firestarter, hammer, one-handed blade and an emergency whistle.

Knife Firebird FH11-GB BY GANZO

RUI 19651 COLTELLO CHIUDIBILE

LEATHERMAN Z-REX

There are other glass breakers and strap cutters on the market, but Z-Rex is the first one to pull together all the one-off features into one lightweight, intuitive and comfortable-to-use tool.

Designed for firefighters, EMTs and law enforcement with an oxygen tank wrench, carbide glass breaker and more

The T4000 C continues the purest Extrema Ratio tanto collection, for those who love Japanise profile blades but do not want to waive the typical tactical accessories like handle and sheath.

Micro torcia a LED con tampone integrato in microfibra utilizzabile per tenere pulita la superficie degli shermi dei dispositivi digitali come tablet e smartphone. 
Per pulire il touch screen è sufficiente posizionare il tampone sullo schermo e passarlo delicatamente. Ideale per eliminare impronte digitali, polvere e macchie

Carson Special Forces Tanto M16-10KSF black blade combined wire Blade: Cr13MoV - Handle: 2CR13 st.st. - L.tot .: cm.17,8 - Frame Lock

Victorinox ELECTRICIAN coltello multiuso

Mod. Regist.©
Brand: TOKISU
pocket knife
Handle: G10 and Carbon Fiber
Blade: Stainless steel 7Cr17MoV (CNC Finished)
Opening with ball bearing
Blade thickness: 3.5 mm
Blade size: 9.5 cm
Clip
Velvet pouch
Presentation: Box with magnetic closure.