• Reduced price

Mosfet GATE TITAN V2 complete set rear wired

€155.00
€139.90 Save €15.10
Tax included Consegna: da 24 a 48 ore

TITAN™ (drop-in mosfet) will transform your AEG into an advanced training weapon system. Gain a tactical advantage thanks to the extremely fast trigger response, with an option of adjusting the AEG for each mission with 20 functions. Give your AEG a new lease of life!

Quantity

  • Secure payments with paypal / credit card
    Secure payments with paypal / credit card
  • Shipping 29€ for Europe EU
    Shipping 29€ for Europe EU
  • Fast shipping with express courier
    Fast shipping with express courier

TITAN gives you the option to adjust:

  • Trigger sensitivity
  • Pre-cocking boost
  • Fire selector mode
  • Burst mode
  • Rate of fire
  • Low battery warning
  • Battery protection
  • Sniper delay
  • What is a drop-in mosfet? It is an electronic unit, which replaces the trigger contacts and the cut-off lever, which takes control of your AEG

Tactical Programming Card

Configure your TITAN in the field using the outstanding Tactical Programming Card which provides you with very easy access to the Drop-in Module functions.

GATE Control Station™

Simply update the firmware and/or adjust the settings at home, using the USB-Link and the GATE Control Station™ computer App.

USB-Link

The USB-Link works in tandem with the GATE Control Station™ App, giving you full access to TITAN's functions and allows you to update the firmware of the drop-in module and the Tactical Programming Card.

Get ready for the amazing functions such as:

icon-trig-sens-adj.png

TRIGGER SENSITIVITY ADJUSTMENT

Five trigger sensors allow you to control trigger sensitivity. You do not have to disassemble your AEG. Just use the Tactical Programming Card or the GATE Control Station™ App to adjust the trigger to your preferences and level of skills. 

icon-con-fir-sel.png

CONFIGURABLE FIRE SELECTOR (gen.2)

Two selector sensors allow you to use up to six fire selector modes, including innovative SEMI-BURST-AUTO mode:

  • SAFE-SEMI-AUTO
  • SAFE-SEMI-SEMI
  • SAFE-SEMI-BURST
  • SAFE-BURST-AUTO
  • SAFE-SEMI-BURST/AUTO (short press - BURST, long press - AUTO)
  • SEMI-BURST-AUTO (SAFE mode via the fast switch SAFE-SEMI-SAFE)

icon-cyc-det.png

CYCLE DETECTION

Thanks to the gear sensor, TITAN precisely detects in which position the cycle should finish. Therefore, even the shortest trigger action produces at least one full cycle.

Thanks to the cycle detection function you get:

  • Automatic BURST – there is no need to set the burst time. You can set the burst between two and 10 shots;
  • Automatic PRE-COCKING – Pre-cocking is fully operational in SEMI, BURST and AUTO modes and there is no need to set the pre-cocking boost manually. You can simply set the pre-cocking as high, mid or low;
  • FULL CYCLE - when the pre-cocking is off, TITAN ensures that the gearbox completes a full cycle. You gain a higher reliability.

icon-pre-coc.png

PRE-COCKING (gen.2*)

Victory in the game is often a matter of fractions of seconds. Thanks to PRE-COCKING, you gain a trigger reaction similar to a real gun. It allows for initial spring compression, which speeds up the trigger response significantly.

  1. AUTO MODE – the spring is automatically compressed after each shot,
  2. SMART MODE – slow trigger action compresses the spring, and fast trigger action fires the shot.

And three PRE-COCKING BOOST options: HIGH / MID / LOW


*Now the pre-cocking is fully operational in SEMI, BURST and AUTO modes and there is no need to set the pre-cocking boost manually

Please note: using PRE-COCKING increases wear and tear on the gearbox.

icon-burst.png

BURST (gen.2*)

The burst enables you to shoot a pre-determined number of BBs, which is very useful in MILSLIM and when using low-caps.


* There is no need to set burst time. You can easily set burst between two and 10 shots.

icon-rof-con.png

ROF CONTROL

This enables a reduction in a gun's rate of fire. You use stronger LiPo batteries, and still have a ROF just like in a real gun.

icon-rof-sta.png

ROF STAB

It allows you to change the way the ROF Control works:
ON - ROF Control uses PWM to decrease ROF. Thanks to this gearbox works smoothly what decreases wear and tear of AEG internal parts.
OFF - ROF Control adds breaks between shots to decrease ROF. It gives you more realistic experience.

sni-del.png

SNIPER DELAY

It lets you to set delay between each SEMI shots to simulate the delay from reload or recoil. You can set 0.5s, 1s, 2s or 3s delay.

icon-sma-tri.png

SMART TRIGGER

We know how vital the fast trigger response is during combat. This is why we have developed the Smart Trigger function. It enables you to achieve a faster trigger response. It works with the ROF Control System. During the first shot, the microprocessor sets the ROF Control to 100%. After the first shot, it switches to a previously programmed value (e.g. 50%). As a consequence, the first shot is fired at a full ROF, and subsequent shots at a reduced ROF. The best results can be achieved by using a battery with a higher than standard voltage. For example, if you use a 7.4V battery, you can replace it with 11.1V. In this way, you will achieve a faster trigger response with the same rate of fire as with a standard battery.

*Works only when ROF STAB is ON.

aug-mod.png

AUG MODE

Enjoy two stage trigger. Activate AUG Mode and set two different trigger sensitivities. Pulling the trigger slightly produces SEMI or BURST fire and pulling the trigger further produces BURST or AUTO fire (depending on the fire selector mode).

icon-bat-pro.png

BATTERY PROTECTION (gen.2*)

Protection against Over-Discharge of the Battery. Modern LiPo and LiFe batteries are very sensitive to over-discharge. If you do not want to damage the battery and you care about its service life, this protection is indispensable. The microprocessor monitors the battery voltage constantly. When the voltage drops down to a critical level, it will not allow firing.


*TITAN detects the number of cells automatically. There is no need to reprogram TITAN every time you replace the battery.

icon-low-bat-war.png

LOW BATTERY WARNING

When the battery voltage drops to a predefined level, the motor will vibrate at regular intervals.  

icon-sma-fus.png

SMART FUSE

We have developed an electronic fuse with an accurate current sensor. A combination of current, voltage and temperature measurements makes your AEG installation highly reliable. It protects the MOSFET against overheating, overloading and short-circuiting. If your airsoft gun becomes jammed, the function protects the motor and battery against damage.

icon-ada-act-bra.png

ADAPTIVE ACTIVE BRAKE

It automatically adjusts the motor's braking power according to your needs. This prolongs the lifespan of the motor.

icon-mosfet.png

MOSFET

Do you want to achieve a higher ROF and faster trigger response? Are you planning a power upgrade of your gun? In that case, you need a MOSFET.

It targets the energy from the battery directly to the motor, bypassing the mechanical trigger contacts. As a result, you gain a higher ROF of the gun and a faster trigger response.

icon-self-test.png

BUILT-IN SELF-TEST

This allows you to quickly check whether the drop-in module is working properly. It helps to locate where the problem lies when anything goes wrong.

icon-coating.png

COATING

Thanks to its special conformal coating, our product is resistant to atmospheric conditions (Military Specification MIL-V-173C).

icon-deans-t.png

DEANS-T READY

The product has factory-fitted low-resistance deans-t connectors.

icon-tamiya.png

MINI-TAMIYA ADAPTER

Thanks to the Mini Tamiya Adapters included in the kit, you can smoothly connect the drop-in module to your original (stock) installation.

icon-li-po.png

14.8V LI-PO READY

The drop-in module can be used with batteries up to and including 14.8V LI-PO. The minimum operating voltage is 3V and maximum is 17V.

icon-pri-qui.png

PRINTED QUICKSTART

Make your adventure start more easily with a new product. The quickstart contains basic information and hints.

 

 

 

TITAN has no less than eight sensors!

  • 1 gear sensor
  • 2 selector sensors
  • 5 trigger sensors

 

Thanks to the optical sensors we have eliminated the problem of faulty switches that can occur in competitors' drop-in mosfets. The trigger has no mechanical connections with the PCB. This eliminates mechanical stresses and provides for high reliability.

GATE CTO, April 2016

  • Automatic BURST – there is no need to set burst time. You can set burst between two and 10 shots;
  • Automatic PRE-COCKING – Pre-cocking is fully operational in SEMI, BURST and AUTO mode and there is no need to set pre-cocking boost manually. You can easily set the pre-cocking as high, mid or low;
  • FULL CYCLE - when the precocking is off, TITAN ensures that the gearbox always makes full cycles.

You can trust TITAN because:

  • Every time you pull the trigger gearbox completes the correct cycle. The gears stop exactly where they should. The gearbox works efficiently.
  • It is protected against short-circuits, overheating and overloading
  • It protects the battery against over-discharge
  • It significantly improves battery life, rate of fire, spring life and gearbox reliability (when pre-cocking is off)
  • It is compatible with the strongest AEG replicas and batteries (ready to use with LiPo 14.8V, 5000 mAh, 60C)

Why TITAN is so special?

  • It has a user-friendly configuration via the Tactical Programming Card and/or GATE Control Station
  • It has option to make firmware updates via the internet
  • It has innovative optical sensors instead of mechanical switches that can be prone to faults
  • It replicates a trigger response like in a real gun
  • It replaces the cut-off lever
  • It is compatible with DSG and SSG gears
  • It is compatible with most v2 gearboxes (including cnc) on the market without any modification

TITAN is a modular system which includes:

    1. TITAN Drop-in Module (rear or front wired)
    2. TITAN Tactical Programming Card
    3. USB-Link for GATE Control Station™ App

You can buy each module separately or altogether as a complete set. We recommend to buy the complete set to take total advantage from TITAN.

TITAN Complete Set

The complete set version: at once you purchase all you need to take total advantage from TITAN.

TITAN
TITAN
TITAN

 

 

  1. TITAN Drop-in Module (rear or front wired)
  2. TITAN Tactical Programming Card
  3. USB-Link for GATE Control Station™ App
  4. Installation Kit
  5. Quickstart Guides

TITAN Drop-in Module

The best if you have already bought the TITAN Complete Set but you long for having TITAN in two or more airsoft guns. Then you don’t need the second Tactical Programming Card and the second USB-Link from the complete set. This is also suitable for you when you want to have your TITAN installed and set up by an airsoft service and you don’t need to change settings.

TITAN TITAN TITAN

  1. TITAN Drop-in Module (rear or front wired)
  2. Installation Kit
  3. Quickstart Guide

Notice: To run and set up the Drop-in Module, it is necessary to have the TITAN Tactical Programming Card or USB-Link.

TITAN Tactical Programming Card

Provides you with very easy access to the Drop-in Module functions' settings anywhere you are.

TITAN TITAN

  1. TITAN Tactical Programming Card
  2. Quickstart Guide

Notice: TITAN is not compatible with WARFET Tactical Programming Card.

USB-Link for GATE Control Station™ App

Allows to connect TITAN to PC in order to use GATE Control Station App.

TITAN TITAN

  1. USB-Link for GATE Control Station App
  2. Quickstart Guide

What is the difference between using Tactical Programming Card or USB-Link?

The main difference is that the Tactical Programming Card is small, lightweight and portable. Using USB-Link with GATE Control Station™ gives more functions, including firmware update and requires connection to PC.

Tactical Programming Card USB-Link with GATE-CS
Settings adjustment + +
Firmware update - +
Portable + -
Sensors check + +
Diagnostic Trouble Codes + +
Statistics - +
Additional settings - +

 

http://gatee.eu/images/gate/instrukcje/TPC_Manual_20161124.pdf

http://gatee.eu/images/gate/instrukcje/USB-Link_Manual_20161124.pdf

http://gatee.eu/images/gate/instrukcje/GCS_Manual_20161124.pdf

GATE
0444
3 Items

No customer reviews for the moment.

Prodotti correlati

(16 altri prodotti della stessa categoria)