ACTION ARMY CANNA 300mm PER VSR10 misura interna 6,03mm

PIRANI SPRINGS Sniper 90 VSR10 spring
-Built with pre-hardened steel EN 10270-2 CR-SI FD resistance 2081/2134 N / mm2
- Ground support surface
- Stabilization heat treatment at 400 °
- Browning treatment with absence of hydrogen
- Tolerance on load + -2.5% tested with camera on 100% of production

For MB02 - MB03 - VSR10

After two years of studies, many prototypes and multiple tests, we have finally reached the FINAL version.

The zero friction for VSR10 is characterized by a body in Delrin, a plastic material with excellent mechanical properties, strong and light and with a very low surface roughness, only RA of 1.2.

The spiral milling, performed on the entire surface, gives the kit created a breathtaking appearance while at the same time reducing the contact surface between piston and cylinder; this design choice also favors the retention of the lubrication grease ensuring a constant very low friction between the parts.

The zero friction kit is not limited to the body, the kit consists of many perfectly assembled elements:
° 45 degree coupling tail in Ergal Aluminum 7075 aeronautical alloy.
° 90-degree hooking tail in burnished steel, self-lubricating and super resistant;
° Countersunk cylinder head with V-form oring, cylinder sealing oring and hopup rubber sealing oring.
° Airbrake Removable flared and locking dowel if you want to remove the airbrake.
° ERGAL 7075 aeronautical alloy spring guide with removable steel bearings. digi softair digisoftair
All in one and only KIT.


The kit consists of BOTH HOOKING TAILS, one tail will be installed and one will be loose in the package

Each single kit will be supplied with 2 sealing ORs, with relative label MB03 well and TM and clones

Each single kit will be supplied with grain and airbrake. at the time of installation, it is recommended to use thread locker.

Zero friction kit tested with the main cylinders on the market: Original TM cylinder - Original MB03 well cylinder - Actionarmy cylinder for VSR10 - Laylax cylinder for VSR10

we Digi Softair have personally evaluated and tested ESC Works products ensuring that they are functional products

we Digi Softair have personally evaluated and tested ESC Works products ensuring that they are functional products

CNC ZERO TRIGGER FOR TM AWS AND WELL MB44XX - VERSION 2

Laylax steel precision barrel 6.03mm PSS10 for vsr10 g spec

VFC hop up rubber for co2 and gas ASG VFC 

King Arms Cilindro Blaser R93 UPGRADE, migliori prestazioni, maggior tenuta, miglior scorrimento del pistone e maggior durata rispetto al ricambio originale, ideale per molle dure

Action Army spring M170 VSR10

we Digi Softair have personally evaluated and tested ESC Works products ensuring that they are functional products

Action army HOP UP RUBBER FOR MARUI VSR10/HIGH CAPA PISTOL

The Hop-up Chamber uses an innovative system for regulating the pressure positioned on the hop up presser, this means that it is given extreme precision and stability.