we Digi Softair have personally evaluated and tested ESC Works products ensuring that they are functional products

we Digi Softair have personally evaluated and tested ESC Works products ensuring that they are functional products

Full upgrade Zero Trigger set for VSR rifles and copies - Gen. 4.1 airsoftpro

SPRING M110 included

we Digi Softair have personally evaluated and tested ESC Works products ensuring that they are functional products

VSR10 Hop up Chamber

Action Army

MARUI COMPATIBLE

Innovative system to manage the hopup adjustment from above using a bolt, super precise millimeter adjustment!
it is necessary to modify your external barrel, it is supplied together with the MAPS to be able to drill in the right place without making mistakes COMPATIBLE WITH BOTH FLAT AND FULL NUB digisoftair digi softair

we Digi Softair have personally evaluated and tested ESC Works products ensuring that they are functional products

PIRANI SPRINGS Sniper VSR10 spring
-Built with pre-hardened steel EN 10270-2 CR-SI FD resistance 2081/2134 N / mm2
- Ground support surface
- Stabilization heat treatment at 400 °
- Browning treatment with absence of hydrogen
- Tolerance on load + -2.5% tested with camera on 100% of production

For MB02 - MB03 - VSR10

Reinforced piston for your airsoft sniper rifle. For maximum performance and durability. The hybrid piston is made of three different materials:

• Light aluminum body

• Two POM rings for better sliding in the cylinder

• Catch back end part made of stainless steel.

Compared to the previous version, the piston was completely redesigned. Rubber pad now exceeds larger area, stainless steel part is shorter, piston is more lightweight. This reduce the weight by a quarter over the previous generation. And lower weight means higher performance. The groove below the sealing ring is shallower with a modified shape, reducing the risk of head deformation due to impact. Improvements have also been made to the sliding POM piston rings for longer life of the front of the piston. They were slightly enlarged so that the metal parts did not touch cylinder and had a smoother surface.

SPECIFICATIONS:

• The piston is made by CNC machining from light, but durable aluminum alloy 6061-T6 (Dural) with a high-quality anodized finish.
• The piston catch is made of stainless steel.
• The piston has two sliding polyacetal (POM) rings.
• The piston head has an back-pressure system with O-ring (O-ring expands and seals better when shotting).
• The enlarged inner piston diameter allows you (and we recommend) to insert a stronger 9mm spring upgrade. www.digisoftiar.com
• Dimensions: lenght - 118,7mm, outer diameter - 21,8mm, inner diameter - 13,5mm
• Weight: 30g

APPLICATION:

• CYMA CM.702, which is M24 replica. No modification needed.

PIRANI SPRINGS Sniper 90 VSR10 spring
-Built with pre-hardened steel EN 10270-2 CR-SI FD resistance 2081/2134 N / mm2
- Ground support surface
- Stabilization heat treatment at 400 °
- Browning treatment with absence of hydrogen
- Tolerance on load + -2.5% tested with camera on 100% of production

For MB02 - MB03 - VSR10

Hopup VSR TUNING KIT
FLAT type optimized for Mapleleaf or Rhop flat rubber pads
100% compatible with original TM hopup chamber and well digisoftair digi softair

Dedicated presser for standard adjustment NOT COMPATIBLE WITH TDC, NUB not included

we Digi Softair have personally evaluated and tested ESC Works products ensuring that they are functional products

for airsoft gun

LayLax/Nine Ball Marui Wide Use Air Seal Chamber Packing

Pistone e guida molla Per VSR MARUI o copie (molla non inclusa)

Action army HOP UP RUBBER FOR MARUI VSR10/HIGH CAPA PISTOL

LAYLAX spring SP170 L96 e APS2