TITAN V3 represents a groundbreaking AEG Control System designed for V3 gearboxes, transforming your airsoft replica into advanced training equipment. With TITAN V3, you can precisely adjust trigger sensitivity with military precision and access a range of advanced functions. The innovative proximity trigger sensor offers up to 300 possible sensitivity settings. Beyond lightning-fast trigger response, TITAN V3 brings a host of other valuable features. This is not just a "plug-and-play" MOSFET; it's a comprehensive system that significantly enhances your AEG's performance.
Technical Specifications:
- Supply Voltage Range: 3.75-17 V
- Current Consumption: 22 mA
- Low Power Mode: 320 µA
- Dimensions (Length x Width x Height): 79.0 x 25.8 x 13.5 mm
- Finished Product Weight: 28.2 g
- Operating Temperature Range: min. -15°C, max. +50°C
- Relative Humidity: ≤ 80%
GCS App:
Connect your TITAN V3 to the GATE Control Station (GCS) app to gain complete control of your AEG:
- Control Your Airsoft Gun: Manage your weapon directly from iOS, Android, macOS, or Windows devices.
- Adjust Trigger Sensitivity: Set trigger sensitivity as you prefer and make other TITAN settings adjustments with ease.
- Automatic Pre-Cocking: Achieve a trigger response akin to a real firearm.
- Rate of Fire (ROF) Control: Experiment with ROF control, magazine simulation, and other functions.
- Firmware Update and Upgrade: Keep your TITAN system up to date with the latest improvements.
- BB Counters and Telemetric Data: Monitor BB count and gather telemetric data for performance enhancement.
- Diagnostics and Reports: Troubleshoot and receive notifications through the app.
- Virtual STATUS for Smartwatches and Smartphones: Detailed control even on your wearable devices.
- Recoil and Magazine Sensors: Realistic reload sequence with bolt catch and magazine sensors.
TITAN and the GCS app provide you with complete control of your AEG, offering cutting-edge functionalities that elevate your airsoft experience.
Proximity Trigger Sensor:
Thanks to the precise proximity trigger sensor, you can fine-tune trigger sensitivity with military precision. Depending on your trigger's construction, it allows for up to 300 possible sensitivity settings. All of this can be achieved without disassembling your AEG. Simply utilize the GATE Control Station app to adjust the trigger to your preferences and skill level.
Selector Modes:
TITAN V3 offers a variety of selector modes, including safety, semi-automatic, binary, burst, and automatic. These modes provide flexibility and versatility to adapt to your playing style.
2-Stage Trigger:
The 2-stage trigger allows you to set two different trigger sensitivities. A slight pull results in a single shot or burst fire, while a full pull leads to burst or automatic fire. This customization allows you to tailor your AEG to your needs.
Pre-Cocking:
Pre-cocking is crucial for achieving faster trigger response, similar to that of a real firearm. TITAN V3 offers two pre-cocking modes, automatic and manual, allowing you to select your desired pre-cocking level.
Magazine Simulation:
You can simulate a lower magazine capacity than what is actually used, adding realism to your gameplay. After a predetermined number of BBs are fired, you must wait for a specified duration before the next shot, as if you were replacing an empty magazine with a full one.
Series Safety Limit:
The series safety limit allows you to set a predefined number of BBs fired in a single series. This feature can serve as protection against trigger jams. In emergencies, you can stop the series by changing the selector position.
Sniper Delay:
The sniper delay enables you to set the delay between shots or series to simulate the time for reloading or recoil. You can set the delay to 0.2 s, 0.5 s, 1 s, 2 s, or 3 s for ADVANCED firmware and 0.01-5 s for EXPERT firmware.
Smart Trigger:
We understand the importance of fast trigger response in combat. That's why we've developed the Smart Trigger function, which enables you to achieve quicker trigger response. It works in conjunction with the ROF Control System. During the first shot, the microprocessor sets the ROF control to 100%. After the first shot, it switches to a previously programmed value (e.g., 50%). As a result, the first shot is fired at full ROF, and subsequent shots at a reduced ROF. The best results can be achieved by using a battery with above-standard voltage. For example, if you're using a 7.4 V battery, you can replace it with an 11.1 V one to achieve faster trigger response with the same rate of fire as with a standard battery.
Battery Protection and Warnings:
TITAN V3 offers protection against battery over-discharge, crucial for battery longevity. The microprocessor constantly monitors battery voltage. When the voltage drops to a critical level, it prevents firing. The protection is especially vital for sensitive LiPo and LiFe batteries.
Active Brake:
Thanks to the gear sensor, TITAN precisely detects where the cycle finishes. Even the shortest trigger action produces at least one full cycle. The optical sector gear sensor counts each tooth of the gear, allowing for the use of a broad range of gears, including DSG, SSG, 19-tooth, and standard ones. With the cycle detection function, you gain:
Automatic Burst:
You don't need to set the burst time; you can set the burst between 2 and 10 shots.
Automatic Pre-Cocking:
Pre-cocking is fully operational in SEMI, BURST, and AUTO modes, and there's no need to set the Pre-Cocking boost manually; you can simply set Pre-Cocking as high, mid, or low.
Full Cycle:
When Pre-Cocking is off, TITAN ensures that the gearbox completes a full cycle, enhancing reliability.
Notification Settings:
You can enable or disable information and warning vibrations to make your gun more stealthy.
Diagnostics:
This feature allows you to troubleshoot your AEG in case of any issue. Errors are communicated as they occur, and their descriptions can be found in the GCS app.
Firmware Update:
The GCS app allows for firmware updates via the internet, enabling you to quickly apply changes, improvements, and bug fixes.
Smart Fuse:
The Smart Fuse protects your AEG's battery, motor, and controller, even in case of a reverse battery connection. It combines current, voltage, and temperature measurements, making your AEG installation highly reliable. It safeguards the MOSFET against overheating, overloading, and short-circuiting. If your airsoft gun gets jammed, this function protects the motor and battery from damage.
MOSFET:
If you want to achieve a higher rate of fire and faster trigger response or plan a power upgrade for your gun, a MOSFET is essential. It directs energy from the battery directly to the motor, bypassing the mechanical trigger contacts. The result is a higher rate of fire and faster trigger response.
Built-In Self-Test:
This feature allows you to quickly check whether the drop-in module is functioning correctly, making troubleshooting easier in case of malfunctions.
Weather Resistance:
Thanks to its special conformal coating, our product is resistant to atmospheric conditions, meeting Military Specification MIL-V-173C.
14.8 V Li-Po Ready:
The drop-in module is compatible with batteries up to and including 14.8 V LI-PO. The minimum operating voltage is 3 V, and the maximum is 17 V.
What Sets TITAN V3 Apart:
- User-Friendly Configuration via the GATE Control Station App
- Firmware Updates via the Internet for Continuous Improvements
- Proximity Trigger Sensor Offering Up to 300 Sensitivity Settings
- Innovative Optical Sensors Replacing Mechanical Switches
- Access to Statistics and Telemetry Data
- Replicates Trigger Response Like in Real Firearms
- Compatible with Various Gear Types
- Compatible with Most V3 Gearboxes on the Market
Usb-Link and Blu-Link not included, the packaging could be that of the basic version, but thanks to Gate's recent corporate policies this version has the firmware already updated to the Expert version, therefore it is sold as the Expert Version
