Modify Testa Pistone Alluminio
RICAMBIO PER FUCILE ELETTRICO DA SOFTAIR, TESTA PISTONE CUSCINETTATA MODIFY IN ALLUMINIO
Testa pistone in alluminio con cuscinetti a sfera per un minor attrito della molla e meno sollecitazioni al suo interno.
Ergal padded piston head with double or lightened for high speed (TPAVN)
100% COMPATIBLE MARUI
100% MADE IN ITALY
100% MADE IN ITALY
DMAC Piston Head X-Flow EVO® in Ertalon + mos2
The innovative X-Flow EVO Head Piston in Ertalon+mos2 (polymer) made with the CNC machining, has been designed and calibrated to the thousandth.
The piston head designed for the most demanding DSG and speed builds, helping achieve best results and overcome limits. Thanks to the use of 10 vents, airflow significantly increases improving sealing. The ultra-lightweight POM material together with CNC machining ensures repeatability of shots, perfect head-to-cylinder seal, high RPS ratio, and eliminates FPS drops. The adjustable AOE makes it essential for every speed build.
The FPS ERGAL piston head is a great upgrade that will increase the efficiency of airflow through the cylinder, ensuring an air tightness never seen beforeThis piston head has ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air
Maxx Model, CNC aluminum piston head with double oring bearing to improve the performance of your electric ASGs
The RED POWER piston head is made in DELRIN at the CNC on specific measures by TopMax Elaborazioni. The DELRIN structure makes this piston head reliable, long lasting and incredibly suitable for any type of configuration.
The RED POWER piston head is made with axial-internal anti-vacuum holes and radial outlet holes, which allow a better distribution of the air on the sealing O-RING, speeding up its expansion during the compression phase.
The BLUEPOWER piston head is CNC made in DELRIN on specific measurements by TopMax Elaborazioni. The DELRIN structure makes this piston head reliable, long-lasting and incredibly suitable for any type of configuration. The BLUEPOWER piston head is made with axial-internal anti-vacuum holes and radial outlet holes, which allow for better distribution of the air on the sealing O-RING, speeding up its expansion in the compression phase. Compared to the REDPOWER piston head, in the BLUEPOWER the size and position of the radial holes is further different to obtain greater aggressiveness in the compression phase of the O-RING while maintaining stability, constancy and precision in the shot.
FPS CNC ERGAL Double O-Ring Ball Bearing AEG Piston Head (XPGE).
XPGE new version with X-RING and one piece plastic shim for AOE.
The FPS ERGAL piston head is a great upgrade that will increase the efficiency of airflow through the cylinder.
This piston head has ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB.
100% MARUI COMPATIBLE
100% MADE IN ITALY
POM piston head designed for high rof and to increase the silence of the aeg (XPAVP)
FPS Piston air brake piston head POM with double or piston angle adjustment (XPAA)
Piston head AIR BRAKE POM bearing with double or piston coupling angle adjustment system (XPAA).
New version with X-RING technology.
This piston head ensures maximum silence.
100% COMPATIBLE MARUI
100% MADE IN ITALY
BRAND POTENCY SHORT AXIS
BRUTAL Torque / Speed 26000 rpm engine, designed in Italy by Nikksakk Extreme AirsoftCustom
The Novritsch 3D Leaves in ACP camo, they come in bags containing 15 pieces of laser cut leaf material 70-74cm long.
60 ° Super Macaron Hop-up Rubber, Soft and slightly harder than 50 °, it can be used with powers around 1joule making you gain precision and range
