Sizing Instructions
To ensure that the apparel you purchase fits you perfectly and serves its purpose effectively, we invite you to take a moment of your valuable time to consult the measurements guide and corresponding size table to avoid errors.
To take the right measurements, find clothes that fit you well and measure them.
| Size (CM) | XS | S | M | L | XL | XXL | XXXL |
XXXXL
|
|---|
| Waist (loose/stretched) |
71 / 79 |
77 / 85 |
83 / 91 |
89 / 97 |
95 / 103 |
101 / 109 |
107 / 115 |
113 / 121
|
| Length (short/regular/long/extra long) |
101.6 / 106.6 / 111.6 / 116.6 |
102.1 / 107.1 / 112.1 / 117.1 |
102.6 / 107.6 / 112.6 / 117.6 |
103.1 / 108.1 / 113.1 / 118.1 |
103.6 / 108.6 / 113.6 / 118.6 |
104.1 / 109.1 / 114.1 / 119.1 |
104.5 / 109.6 / 114.6 / 119.6 |
105.1 / 110.1 / 115.1 / 120.1
|
| Inseam (short/regular/long/extra long) |
76 / 81 / 86 / 91 |
76 / 81 / 86 / 91 |
76 / 81 / 86 / 91 |
76 / 81 / 86 / 91 |
76 / 81 / 86 / 91 |
76 / 81 / 86 / 91 |
76 / 81 / 86 / 91 |
76 / 81 / 86 / 91 |
Instructions for measurements:
Chest: Button up the clothes and lay them on a flat surface. Measure from the left edge to the right edge just below the sleeves.
Stomach: Button up the clothes and lay them on a flat surface. Measure from the left edge to the right edge at the waistline.
Sleeve Length: Wearing a shirt that you like, measure with an arm at your side, from the shoulder's seam all along the arm until you find the desired length. We recommend that the sleeve should go to the base of your thumb (located at the wrist joint).
For jackets with raglan sleeves, like Stratus® or Cumulus®, measure from the base of the collar down to the sleeve cuff.
Inseam: Button up the pants. Lay the pants out on a flat surface. Measure the inseam distance from the crotch, where the front and back seams meet, to the bottom of the leg.
Pants Length: Button up the pants. Lay the pants out on a flat surface with outseams at both edges. Take care to pull any wrinkles and fullness from the back panel. Measure the distance from the top of the waistband to the bottom of the hem.
For skirts:
Overall Length: Lay flat the skirt that best matches your size with the side stitching facing upwards. Use your hand to flatten/straighten any wrinkles on the fabric. Next, measure the distance between the top edge point and the bottom edge point. To have the most accurate result, you should measure this along the side stitching.
Waist Circumference: Lay flat the skirt that best matches your size with the front zipper facing upwards. Use your hand to flatten/straighten any wrinkles on the fabric. Measure the top part of the skirt (the waistline) starting from one side's edge point to the opposite side's edge point. Next, double the result to get the waist circumference.
Hips Circumference: Lay flat the skirt that best matches your size with the front zipper facing upwards. Use your hand to flatten/straighten any wrinkles on the fabric. Next, measure the distance between the opposite side points on the hip part (depending on the skirt cut, the hips should be about 11-14cm below the top edge of the skirt). Double the result to get the hips circumference.
Tolerance for the dimensions given in the table is +/- 2 cm (applies only to clothing).
