Guarder SP130 Spring
Guarder SP130 Spring
Harmonic steel spring ideal for high speed preparations
RICAMBIO PER FUCILE ELETTRICO DA SOFTAIR
MOLLA IN ACCIAIO ARMONICO A PASSO VARIABILE
Guarder SP130 Spring
Harmonic steel spring ideal for high speed preparations
Spring RCS Top Max
The central stabilization narrowing allows the spring to maintain a more linear and rectilinear position inside the air unit, minimizing lateral displacements and maximizing the life span of the spring, moreover the constant performance of the RCS spring allows to obtain a firmer shot.
Original spare parts for MP7 AEG VFC UMAREX, nozzle rod, nozzle, and spring
PIRANI SPRING TOP 100
Springs made in Italy, with rectified and self-centering support surface, identifying spring force color. Anti-corrosion treatment, spring with variable pitch. Built with pre-hardened steel. The springs have been tested on VFC M4 modified with two bearings, normal stroke, 270mm barrel, hop up and 0.20gr pellets, giving the values expressed by the spring
90 m/s FPS spring has been calibrated on 363 mm inner barrel and gearbox with type D cylinder (for barrels from 301 to 400 mm).
Of course with shorter or longer barrel the performance will decrease or increase, therefore the calibration will be harder or softer
PIRANI SPRING TOP 90
Springs made in Italy, with ground and self-centering support surface, spring force identification color. Anti-corrosion treatment, variable pitch spring. Made with pre-hardened steel. The springs were tested on a modified VFC M4 with two bearings, normal stroke, 270mm barrel, exhaust hop up and 0,20gr pellets, giving the values expressed by the spring
Cylinder head made in CNC ERGAL with anti-vibration design, QUAD-RING of air tightness for the cylinder, elongated spout for perfect air tightness and 3 interchangeable rubber PADs with 3 degrees of hardness to adapt to springs and ROF diversified
The 100 m / s FPS spring has been calibrated on 363 mm barrels and gearbox with type D cylinder (for pipes from 301 to 400 mm).
The Hopup Chamber ME unit has a precision rotary dial design for fine hopup adjustments, also re-engineered the hopup levers and concave nubs to work best with R-hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot.
DMAC Piston Head X-Flow EVO® in Ertalon + mos2
The innovative X-Flow EVO Head Piston in Ertalon+mos2 (polymer) made with the CNC machining, has been designed and calibrated to the thousandth.
The spring has coils with variable pitch in the central area and in that in contact with the spring guide and undergoes a process of grinding the two ends which guarantees optimal performance in the compression phase.
The innovative Delirio Head Piston in Ertalon+mos2 (polymer) made with the CNC machining, has been designed and calibrated to the thousandth. Its particular concave shape without the presence of the front anti vacuum holes, ensures high efficiency during the compression phase, guaranteeing a perfect concentration of the air flow so as to be pushed and routed directly into the nozzle of the cylinder head, avoiding the formation of air vortices
The V2 EVO nozzle rod! of TopMax Elaborazioni is made of a multi-polymeric compound, industrially printed and mixed with other additives, in specific percentages provided by TopMax Elaborazioni.