The Tappet Plate is one of the most important parts of the gearbox responsible for the timing and correct BB feed. Such a crucial element needs to combine two qualities – flexibility and endurance. The shape of the fin has been designed to ensure the best nozzle opening times and minimize friction against the sector gear. While testing, we did not notice any signs of wear, even after 30,000 cycles. Especially for the most demanding users, we've marked where you need to shorten the fin in order for it to work properly with DSG gears. We've also looked at the tolerances between the Tappet Plate and the nozzle. For additional nozzle stabilization we've designed tighter tolerances. Increase the performance of your replica with the GATE Tappet Plate.
G&G ARMANENT
SECOND GENERATION TAPPET PLATE
FOR G&G GR16 SERIES
COMPATIBILE WITH M4/M16 MODELS
Specific References
Nozzle rod in technopolymer loaded with carbon fiber for third version gearbox (ASV3CF).
This product has been designed to be compatible with most of the Gear Box V2 on the market today.
The MP7 EVO pusher rod! of TopMax Elaborazioni is made of a multi-polymer compound, industrially molded and mixed with other additives, in specific percentages provided by TopMax Elaborazioni. The multi-polymeric compound used makes the final product resistant, solid, flexible, long lasting and light, furthermore it makes the product extremely performing on any type of preparation and ensures the right degree of elasticity and stiffness at the same time. The dimensions and characteristics of the pusher shaft are such as to guarantee the best possible smoothness inside the GearBox compared to other similar products on the market.
FPS Reinforced AEG Tappet Plate V 2 (ASV2)
This product has been designed to be compatible with most Gear Box V2s on the market today.
The Tappet Plate is one of the most important parts of the gearbox responsible for the timing and correct BB feed. Such a crucial element needs to combine two qualities – flexibility and endurance. The shape of the fin has been designed to ensure the best nozzle opening times and minimize friction against the sector gear. While testing, we did not notice any signs of wear, even after 30,000 cycles. Especially for the most demanding users, we've marked where you need to shorten the fin in order for it to work properly with DSG gears. We've also looked at the tolerances between the Tappet Plate and the nozzle. For additional nozzle stabilization we've designed tighter tolerances. Increase the performance of your replica with the GATE Tappet Plate.
FPS Reinforced AEG Tappet Plate V 3 ASV3
This product has been designed to be compatible with most Gear Box V3s on the market today.
FPS cylinder TYPE 'B' in stainless steel machined in CNC (CLTB)
TYPE 'B' cylinder with internal air volume for pipes with a length between 201 and 250 mm. 100% MADE IN ITALY
Set of three shims to be placed between the piston head and the piston to modify / adjust the angle of engagement between the first tooth of the piston and the first tooth of the sector.
Maple leaf tensioner solid edition rubber, suitable for maple leaf, macaron and super macaron
The Guarder Harmonic Steel Spring, featuring SP100 hardness, is the ideal choice for high-speed setups due to its extremely quick release.
