Cylinder heads

Cylinder heads for AEG

Cylinder heads

Cylinder heads

There are 36 products.

Showing 1-36 of 36 item(s)

Active filters

Gate Protector Cylinder Head for gearbox V2 and V3

The cylinder head designed to prolong gearbox shell life and provide the perfect seal to achieve best results. The shock-absorbing bumper noticeably increases gearbox life and limits the wear of the piston head. Thanks to high-quality aircraft-grade aluminum CNC machining, the Protector Cylinder Head guarantees a precise fit and high tolerances between the nozzle and its guide, eliminating the mid-cap syndrome.

€17.90

Top Max ERGAL cylinder head V2 with PAD BLACK TCMMV2B

Top Max ERGAL cylinder head with PAD BLACK (TCMMV2B)

Cylinder head made in CNC ERGAL with anti-vibration design, QUAD-RING of air seal for the cylinder, elongated spout for perfect air tightness and PAD in interchangeable rubber with 5 degrees of hardness to adapt to springs and R.O.F. diversified.

€18.90

Testa cilindro extrema softair parts per serie M4 made in italy

Testa cilindro: è in 2 materiali, il corpo in alluminio e il beccuccio in acciaio. Progettata così per avere dei vantaggi in quanto il beccuccio non si rompe e la convogliatura presente all'interno permette di velocizzare l'uscita dell'aria; riducendo al minimo le tubolenze si guadagna una notevole precisione nelle lunghe distanze

TESTA CILNDRO V2

€20.00

Top Max Ergal cylinder head Mp7 TCMMP7

TopMax Processing system patent. Cylinder head made in CNC ERGAL with anti-vibration design, O-RING for air sealing for the cylinder, elongated spout for a perfect air seal and interchangeable rubber PAD

Platform UMAREX/VFC MP7 AEG gen1/gen2 TopMax

€21.90

Top Max Eegal cylinder head V2 with 5 PAD TCMMV2RP5-NV

TopMax Processing system patent. Cylinder head made in CNC ERGAL with anti-vibration design, QUAD-RING for air sealing for the cylinder, elongated spout for perfect air sealing and 5 interchangeable rubber PADS with 5 degrees of hardness to adapt to springs and ROF diversified and revised design with raised stop of the front O-RING.

€23.90

FPS Cylinder Head for Version 3 GEAR BOX made of ERGAL TC03B

FPS Airsoft AEG Gear Box / Mech Box Cylinder Head version 3 made of ERGAL (TC03B).
Great Upgrade for any gear box.
Each FPS Cylinder head is made of ERGAL and it is also anodized for smooth surface finish.
Powerful built in UREPAN bumper that absorbs the shock from the piston head.
Suitable for AK47, AK74, KURZ / PDW, SIG, GALIL.
100% MADE IN ITALY
100% MARUI COMPATIBLE

€14.90

DMAC Cylinder Head FluX-Cut V.2-V.3 Lite

EN: Flux-Cut® head cylinder for gear of the 2nd and 3nd version. Made with the CNC machining, it has a larger cone diameter designed to fit perfectly to the piston one, with a much more pronounced angle. It presents only one o-ring seal but larger. In addition two abutment o-ring have been applied, in front and rear position, designed to ensure that the surface of impact between the two heads is low, and its strength is much more softer, also the particular shape of holes are designed to use the front O-ring part and soften up the impact and extend the life of the gearbox.

€14.90