Dark wire spring L96 TYPE sniper 1 joule

The 140 m / s FPS spring has been calibrated on the original mechanics of the Well brand MB03 rifle.

The 120 m / s FPS spring has been calibrated on the original mechanics of the Well brand MB03 rifle.

These springs are compatible with all of our guns that start with SSG in the name.

Action Army Spring Guide For Marui L96

VSR10 M130 SPRING action army

Action Army spring M170 VSR10

These springs are compatible with all of our guns that start with SSG in the name.

Action army Bearing spring guide for Type 96 B02-003

The 100 m / s FPS spring has been calibrated on the original mechanics of the Well brand MB03 rifle.

A significant novelty is the adjustable trigger for an ideal position in the bow. The trigger can slide in the groove of the base and is secured with a small allen screw. You can access it even when gun is fully assembled. Smooth adjustment is possible in a 7 mm travel length. Player can set his ideal trigger position.

These springs are compatible with all of our guns that start with SSG in the name.

Action army, Spring guide VSR marui and clones

Spring in harmonic steel M150 for L96 marui, recommended on asg with trigger group and reinforced mechanics

9mm upgrade spring for sniper rifles -M120 (400 FPS)

These springs are compatible with all of our guns that start with SSG in the name.

A brand new type of steel spring guide that allows the use of classic 7mm springs and stronger 9mm spring springs

Upgrade set for Ares Amoeba Striker spring action rifle. The package contains the basic parts to increase the performance.

spring M100 included

Full upgrade Zero Trigger set for VSR rifles and copies - Gen. 4.1 airsoftpro

SPRING M110 included

Upgrade set for sniper rifles L96, MB01,05,06, SW M24, M99... AIRSOFTPRO

Durable and light upgrade set for spring action airsoft rifles. Package include all what is needed for basic upgrade.

spring M110 included

Kit: cylinder and cylinder head Action army

Cylinder kit for type 96 Action army

PIRANI SPRINGS Sniper VSR10 spring
-Built with pre-hardened steel EN 10270-2 CR-SI FD resistance 2081/2134 N / mm2
- Ground support surface
- Stabilization heat treatment at 400 °
- Browning treatment with absence of hydrogen
- Tolerance on load + -2.5% tested with camera on 100% of production

For MB02 - MB03 - VSR10

PIRANI SPRINGS Sniper VSR10 spring
-Built with pre-hardened steel EN 10270-2 CR-SI FD resistance 2081/2134 N / mm2
- Ground support surface
- Stabilization heat treatment at 400 °
- Browning treatment with absence of hydrogen
- Tolerance on load + -2.5% tested with camera on 100% of production

For MB02 - MB03 - VSR10

PIRANI SPRINGS Sniper VSR10 spring
-Built with pre-hardened steel EN 10270-2 CR-SI FD resistance 2081/2134 N / mm2
- Ground support surface
- Stabilization heat treatment at 400 °
- Browning treatment with absence of hydrogen
- Tolerance on load + -2.5% tested with camera on 100% of production

For MB02 - MB03 - VSR10

PIRANI SPRINGS Sniper VSR10 spring
-Built with pre-hardened steel EN 10270-2 CR-SI FD resistance 2081/2134 N / mm2
- Ground support surface
- Stabilization heat treatment at 400 °
- Browning treatment with absence of hydrogen
- Tolerance on load + -2.5% tested with camera on 100% of production

For MB02 - MB03 - VSR10

PIRANI SPRINGS Sniper 90 VSR10 spring
-Built with pre-hardened steel EN 10270-2 CR-SI FD resistance 2081/2134 N / mm2
- Ground support surface
- Stabilization heat treatment at 400 °
- Browning treatment with absence of hydrogen
- Tolerance on load + -2.5% tested with camera on 100% of production

For MB02 - MB03 - VSR10

This spring is made of high quality spring steel with proper temper. Ends of the spring are grounded in. Length of the spring is 185mm and outer diameter is 13mm. It is dedicated ONLY for the reinforced piston !!! Make sure it fit in your piston before purchase.

Made for TM AWS and Well series MB44xx sniper rifles with the upgradeded piston. Not suitable for SVD.