bb's holder in woodland color fabric

royal brand capacity about 4000bb

SHS pinion gear O type

lambda is a Japanese airsoft after-parts manufacturer. In order to make good products, we are particular about materials made in Japan, and at our own factory, we process with precision CNC machine tools and hand-finish each one by craftsmen.

Mad Bull 60 Degree Shark Hop Up Kit

White G&G 0,25g in bags of 4000bb. White precision BBS with a diameter of 5.95mm with an error of 0.01mm

BB'S FOR RIFLES AND PISTOLS: ELECTRIC GAS, CO2 AND SPRING FOR AIRSOFT

In most common airsoft chambers, a small rubber roller is between the lever and the HopUp bucking. This pressure roller (nub) provides flexibility and reduces the risk of the BB jam. It pushes the HopUp bucking only at a certain point at the top of it.

Airsoftpro roller has the Greek alphabet omega shape. Thanks to its square base and cut-out shape, it pushes the HopUp bucking  in a much larger surface. This will ensure a better pressure and thus a more stable rotation of the BB. Suitable for both electric and sniper rifles (if the lever allows it).

The nub does not have hole inside and is made of silicone hardness shore 80. It is therefore considered to be harder. In addition, due to its shape, it is logical to force the larger part of the HopUp bucking into the barrel. It is therefore more suitable for medium or stronger (higher FPS) guns. Nevertheless, set the HopUp sensitively to prevent the weapon from being jammed.

Parameters:

• Material: Silicone rubber
• Width for cutout in chamber lever: 3.8mm
• Length for opening in the chamber: 4mm
• Diameter of the round part in the lever: 2.9mm

FPS Lightweight full metal rack 14 teeth Fps piston (PM01)

The 120 m / s FPS spring has been calibrated on 363 mm barrels and gearbox with type D cylinder (for rods from 301 to 400 mm)