Nozzle rod in technopolymer loaded with carbon fiber for second version gearbox (ASV2CF).
This product has been designed to be compatible with most of the Gear Box V2 on the market today.
FPS ASV2CF is a Ver 2 pusher shaft made with high quality carbon fiber. This component is designed to improve the performance of airsoft replicas, with gearbox Ver 2. Thanks to its carbon fiber construction, the nozzle is light but resistant, guaranteeing a longer life than the other versions.
Nozzle rod in technopolymer loaded with carbon fiber for second version gearbox.
The adoption of carbon fiber gives this component greater lightness and mechanical strength as well as decreasing the coefficient of friction.
This product has been designed to be compatible with most of the Gear Box V2 on the market today.
The innovative design and the careful pre-production tests of this spare have led us both to obtain an optimal timing in the phases of opening, draft, forfeiting and ejection of the pellet and to the choice and use of the most suitable loaded technopolymer.
100% MADE IN ITALY
Specific References
FPS Reinforced AEG Tappet Plate V 3 ASV3
This product has been designed to be compatible with most Gear Box V3s on the market today.
The MP7 EVO pusher rod! of TopMax Elaborazioni is made of a multi-polymer compound, industrially molded and mixed with other additives, in specific percentages provided by TopMax Elaborazioni. The multi-polymeric compound used makes the final product resistant, solid, flexible, long lasting and light, furthermore it makes the product extremely performing on any type of preparation and ensures the right degree of elasticity and stiffness at the same time. The dimensions and characteristics of the pusher shaft are such as to guarantee the best possible smoothness inside the GearBox compared to other similar products on the market.
Nozzle rod in technopolymer loaded with carbon fiber for third version gearbox (ASV3CF).
This product has been designed to be compatible with most of the Gear Box V2 on the market today.
The V2 EVO pusher shaft! of TopMax Elaborazioni is made of a multi-polymer compound, industrially molded and mixed with other additives, in specific percentages provided by TopMax Elaborazioni. The multi-polymeric compound used makes the final product resistant, solid, flexible, long lasting and light, furthermore it makes the product extremely performing on any type of preparation and ensures the right degree of elasticity and stiffness at the same time. The dimensions and characteristics of the pusher shaft are such as to guarantee the best possible smoothness inside the GearBox compared to other similar products on the market.
The Tappet Plate is one of the most important parts of the gearbox responsible for the timing and correct BB feed. Such a crucial element needs to combine two qualities – flexibility and endurance. The shape of the fin has been designed to ensure the best nozzle opening times and minimize friction against the sector gear. While testing, we did not notice any signs of wear, even after 30,000 cycles. Especially for the most demanding users, we've marked where you need to shorten the fin in order for it to work properly with DSG gears. We've also looked at the tolerances between the Tappet Plate and the nozzle. For additional nozzle stabilization we've designed tighter tolerances. Increase the performance of your replica with the GATE Tappet Plate.
Spring RCS Top Max
The central stabilization narrowing allows the spring to maintain a more linear and rectilinear position inside the air unit, minimizing lateral displacements and maximizing the life span of the spring, moreover the constant performance of the RCS spring allows to obtain a firmer shot.
Quality bushings and bearings are essential to any airsoft gun's performance and durability. These bushings are the main supports for your gears. It is essential that your bushings are able to handle the stress of your gears and basic operations.
90 m/s FPS spring has been calibrated on 363 mm inner barrel and gearbox with type D cylinder (for barrels from 301 to 400 mm).
Of course with shorter or longer barrel the performance will decrease or increase, therefore the calibration will be harder or softer
TYPE "F" cylinder with internal air volume for pipes with a length between 451 and 550 mm.
100% MADE IN ITALY
FPS Airsoft AEG Gear Box / Mech Box Cylinder Head version 2 made of ERGAL (TC02A).
FPS is proud to present the first ZERO-SHOCK lightened piston with 100% Made in Italy technopolymer body and full metal teeth.
This system patented by Fps allows to attenuate the stresses that the rack transmits to the piston body and it makes the assembly enormously more resistant and reliable than a normal piston.