FPS is proud to present the first 100% made in Italy cable specifically designed for use in the electronics of replicas for softair (mosfet and control units).
FPS is proud to present the first 100% made in Italy cable specifically designed for use in the electronics of replicas for softair (mosfet and control units).
Its FEP coating ensures perfect insulation and adequate resistance which, combined with the flexibility of the small capillaries that compose it, ensures the passage of this thin signal cable into each channel of the gearbox without interfering with the mechanical parts such as the engine pinion.
The certified quality of the components used in the construction of this cable ensures a resistance to high temperatures and a very high electrical conductivity.
Technical data:
Section AWG24
Length: 2 meters
Outer diameter: 1.00 mm
Coverage: FEP
Capillaries: 19 in copper covered in chrome
Maximum temperature of use: 250 ° C
100% MARUI COMPATIBLE
100% MADE IN ITALY
Specific References
-50%
LED module for tracing balls
Features:
Voltage: 7.5-12.6v
Life 10000+ hours
1 Watt
8 Blue SMD LED
Notes: When connected to the battery, the LED module will absorb energy. You must unplug the battery to turn off the module.
(hop up group not included)
FPS FEP-coated high-performance signal cable with 19 chrome-plated
FPS is proud to present the first 100% made in Italy cable specifically designed for use in softair replicas.
The WIRE TECH cable produced by Laboratorio Casella is a 98.8% silver-plated copper cable with high electrical conductivity, very low resistance with a clean section of 1.5 mmq and an external diameter of only 2.1 mm. Specially designed for professional preparations and high-level uses.
Modify silver V2 front wiring complete with switch
male and female T PLUG connectors. improves current conduction compared to the Tamiya connector
Lightweight piston for airsoft replicas with body in technopolymer loaded with carbon fiber and rack with all metal teeth equipped with the patented ZERO-SHOCK system (PM03CF), Weight: 15.2 grams
Set of 20 pieces of steel thickness ST 2 K60 FROM 0.20 mm for gears
FPS Open Steel Bearings Bushings 8 mm (B8CA)100% MADE IN ITALY
FPS Airsoft AEG Gear Box / Mech Box Cylinder Head version 2 made of ERGAL (TC02).
PIRANI SPRING TOP 90
Springs made in Italy, with ground and self-centering support surface, spring force identification color. Anti-corrosion treatment, variable pitch spring. Made with pre-hardened steel. The springs were tested on a modified VFC M4 with two bearings, normal stroke, 270mm barrel, exhaust hop up and 0,20gr pellets, giving the values expressed by the spring
