AirsoftPro offers a simple and durable wrench for cylinder heads. Quality workmanship, anti-slip knurls in the hand, quality anodizing. Using this wrench will ease the effort, both when loosening and when tightening the cylinder head.
Universal wrench for sniper rifle cylinder heads. The 115 mm long aluminum alloy rod has a hole in the middle for the nose of the cylinder head and around it there are four holes and two pre-screwed screws (use a classic 1.5 mm Allen key). The user can freely combine these screws in the holes to achieve a variable pitch that matches the holes on the cylinder head. If the opposite holes do not fit, the head can also be loosened with only one screw.
AirsoftPro offers a simple and durable wrench for cylinder heads. Quality workmanship, anti-slip knurls in the hand, quality anodizing. Using this wrench will ease the effort, both when loosening and when tightening the cylinder head.
Bushings and bearings play the important role of determining the position of the gears. This handy little tool makes them easier to install ensuring they are set correctly in the gearbox case.
NOTE this tool magnifies the applied force so only light tapping should be required. If a bushing or bearing requires excessive force it is most likely not compatible with the case.
MODIFY nuovo cilindro DMND type 1 M4 A1 SR16 series
cilindro 3/4 per canne da 300mm a 363 con intagli per una miglior dissipazione del calore
Maple leaf tensioner solid edition rubber, suitable for maple leaf, macaron and super macaron
SHS V2 aluminum cylinder head for m4 series
with a cushioned pad
Light sticks are a light source which works without electric energy.
Dimensions: 15 x 150 mm, Period of lighting: 8-12 hours