FPS Reinforced AEG Tappet Plate V 2 ASV2
FPS Reinforced AEG Tappet Plate V 2 (ASV2)
This product has been designed to be compatible with most Gear Box V2s on the market today.
RICAMBIO PER FUCILE ELETTRICO DA SOFTAIR,
ASTA SPINGI PALLINO PER GEARBOX VERSIONE 2
FPS Reinforced AEG Tappet Plate V 2 (ASV2)
This product has been designed to be compatible with most Gear Box V2s on the market today.
The V2 EVO pusher shaft! of TopMax Elaborazioni is made of a multi-polymer compound, industrially molded and mixed with other additives, in specific percentages provided by TopMax Elaborazioni. The multi-polymeric compound used makes the final product resistant, solid, flexible, long lasting and light, furthermore it makes the product extremely performing on any type of preparation and ensures the right degree of elasticity and stiffness at the same time. The dimensions and characteristics of the pusher shaft are such as to guarantee the best possible smoothness inside the GearBox compared to other similar products on the market.
V6 gearbox guarder Tappet plate, Compatible with P90 Marui
The MP7 EVO pusher rod! of TopMax Elaborazioni is made of a multi-polymer compound, industrially molded and mixed with other additives, in specific percentages provided by TopMax Elaborazioni. The multi-polymeric compound used makes the final product resistant, solid, flexible, long lasting and light, furthermore it makes the product extremely performing on any type of preparation and ensures the right degree of elasticity and stiffness at the same time. The dimensions and characteristics of the pusher shaft are such as to guarantee the best possible smoothness inside the GearBox compared to other similar products on the market.
FPS Reinforced AEG Tappet Plate V 3 ASV3
This product has been designed to be compatible with most Gear Box V3s on the market today.
FPS Airsoft AEG Gear Box / Mech Box Cylinder Head version 2 made of ERGAL (TC02B).
Lipo Graphene battery, very high performance with 130c discharge
Voltage: 7.4 Volt (2 Cells), Capacity: 1'800 mAh / 65 C, Charging current (max.): 1.8 A, Discharge current (max.): 117.0 A
Watthour: 13.3 Wh, Dimension: 86x35x16 mm, Weight: 990 g
not suitable for mosfet-free replicas, please make sure your ASG is suitable for these batteries
60 ° Super Macaron Hop-up Silicone, Soft and slightly harder than 50 °, it can be used with powers around 1joule making you gain precision and range, ideal for low temperatures
POM piston head designed for high rof and to increase the silence of the aeg (XPAVP)
6.03mm EG Barrel 380mm Prometheus, MADE IN JAPAN, HIGH PRECISION CONSTRUCTION