Viewed products
UF PRO Striker X Combat Pants are designed to meet the demands of military special-forces units. Extreme rugged construction, super-spacious pocket configuration, and knee protection that’s both reliable and comfortable. Together they make Striker X the ultimate combat pants for military operatives.
New Italian Camo Limited Edition
Brand N.E.R.G. Saelback cam holder, M.O.L.L.E. system, front velcro for patches or badges, pocket with velcro closure, size 40x21cm
Lightweight 900D Modular Tactical Backpack
The Lightweight 900D Modular Tactical Backpack is designed to ensure versatility, lightness, and strength. With a construction in 900 Denier polyester, every detail is designed to meet the needs of tactical operators. Customizable and practical, this backpack is a reliable ally in the most challenging situations.
Explore our extensive range of high-quality service and combat uniforms, designed with the distinctive Italian cut. Crafted with durable RIPSTOP POLYCOTTON fabric (60% cotton + 40% polyester), these uniforms provide durability and comfort during your missions and adventures.
Top max spare parts, blue power, red power, mim piston, reinforced piston, derlin piston, pro piston
ASG spare parts, AEG spare parts, gearbox, gears, springs, pistons, piston, mim piston, spring guide, piston head, cylinder head, cylinder head, hop up rubber, hop up groups, precision barrels, reinforced piston,
Fps, retroarms, modify, magic box, prometheus, laylax, airsoft pro, guarder, madbull, marui, bolt, shs, classic army, element, systema, dmac, ats, gate, evolution, top max, topmax, maple leaf
Tokyo marui, kwa, kwc, ghk, vfc, kjw, cybergun, umarex, g&g
Top max spare parts, blue power, red power, mim piston, reinforced piston, derlin piston, pro piston
ASG spare parts, AEG spare parts, gearbox, gears, springs, pistons, piston, mim piston, spring guide, piston head, cylinder head, cylinder head, hop up rubber, hop up groups, precision barrels, reinforced piston,
Fps, retroarms, modify, magic box, prometheus, laylax, airsoft pro, guarder, madbull, marui, bolt, shs, classic army, element, systema, dmac, ats, gate, evolution, top max, topmax, maple leaf
Tokyo marui, kwa, kwc, ghk, vfc, kjw, cybergun, umarex, g&g
The lightened piston PRO of TopMax Elaborazioni is made with a compound based on DELRIN, Elastomer and Fiberglass, fused and industrially molded in specific percentages provided by TopMax Elaborazioni. The rack of this type of PRO piston is made of metal powders in M.I.M. (Metal Injection Molding), with a value of about 98/99% of full on the total.
ITEM ODICE: TMRAS0.1
Compatible with ASG EVOLUTION Series, SpecnaArms, Mako and similar QD bearing spring guide with reinforced base, made by CNC dedicated to GearBox V2 Evolution/ SPECNA / MAKO INDUSTRIES / Low cost compatible.
The PRO piston filled by TopMax Elaborazioni is made with a compound based on DELRIN, Elastomer and Fiberglass, cast and molded industrially in specific percentages provided by TopMax Elaborazioni. The rack of this type of PRO piston is made of metal powders in M.I.M. (Metal Injection Molding), with a value of about 98/99% of full on the total.
Spring RCS Top Max
The central stabilization narrowing allows the spring to maintain a more linear and rectilinear position inside the air unit, minimizing lateral displacements and maximizing the life span of the spring, moreover the constant performance of the RCS spring allows to obtain a firmer shot.
ITEM CODE: TMRAS0.3
Top Max 8mm Low Profile Stainless Steel ALPHA evo Bushings TMBC08NX / BPA
Spring RCS Top Max
The central stabilization narrowing allows the spring to maintain a more linear and rectilinear position inside the air unit, minimizing lateral displacements and maximizing the life span of the spring, moreover the constant performance of the RCS spring allows to obtain a firmer shot.
Cylinder head made in CNC ERGAL with anti-vibration design, QUAD-RING of air tightness for the cylinder, elongated spout for perfect air tightness and 3 interchangeable rubber PADs with 3 degrees of hardness to adapt to springs and ROF diversified
The V2 EVO nozzle rod! of TopMax Elaborazioni is made of a multi-polymeric compound, industrially printed and mixed with other additives, in specific percentages provided by TopMax Elaborazioni.
The delayer for UMAREX/VFC MP7 AEG gen1/gen2 platform by TopMax Elaborazioni is made of molded and shaped techno-polymer and is designed to delay the opening of the pusher shaft. We recommend gluing the delayer to the sector gear with Loctite Attak Gel or similar. In order to better manage the shooting cycle, and therefore the use of the delayer, excellent mechanical knowledge is required, also in relation to the adaptation of the pusher shaft.
The MP7 EVO pusher rod! of TopMax Elaborazioni is made of a multi-polymer compound, industrially molded and mixed with other additives, in specific percentages provided by TopMax Elaborazioni. The multi-polymeric compound used makes the final product resistant, solid, flexible, long lasting and light, furthermore it makes the product extremely performing on any type of preparation and ensures the right degree of elasticity and stiffness at the same time. The dimensions and characteristics of the pusher shaft are such as to guarantee the best possible smoothness inside the GearBox compared to other similar products on the market.
Top Max ERGAL cylinder head with PAD BLACK (TCMMV2B)
Cylinder head made in CNC ERGAL with anti-vibration design, QUAD-RING of air seal for the cylinder, elongated spout for perfect air tightness and PAD in interchangeable rubber with 5 degrees of hardness to adapt to springs and R.O.F. diversified.
The WHITE piston head is CNC made in DELRIN on specific measurements by TopMax Elaborazioni. The incredibly low weight of 3.27 grams net and the DELRIN structure make this piston head reliable, durable and incredibly suitable for any type of configuration. The WHITE piston head is made with axial-internal anti-vacuum holes and radial outlet holes, which allow for better distribution of the air on the sealing O-RING, speeding up its expansion in the compression phase
The BLUEPOWER piston head is CNC made in DELRIN on specific measurements by TopMax Elaborazioni. The DELRIN structure makes this piston head reliable, long-lasting and incredibly suitable for any type of configuration. The BLUEPOWER piston head is made with axial-internal anti-vacuum holes and radial outlet holes, which allow for better distribution of the air on the sealing O-RING, speeding up its expansion in the compression phase. Compared to the REDPOWER piston head, in the BLUEPOWER the size and position of the radial holes is further different to obtain greater aggressiveness in the compression phase of the O-RING while maintaining stability, constancy and precision in the shot.
Spring RCS Top Max
The central stabilization narrowing allows the spring to maintain a more linear and rectilinear position inside the air unit, minimizing lateral displacements and maximizing the life span of the spring, moreover the constant performance of the RCS spring allows to obtain a firmer shot.
Spring RCS Top Max
The central stabilization narrowing allows the spring to maintain a more linear and rectilinear position inside the air unit, minimizing lateral displacements and maximizing the life span of the spring, moreover the constant performance of the RCS spring allows to obtain a firmer shot. The RCS springs specific to TopMax Elaborazioni are individually tested during production to guarantee punctually the value expressed in m / s.
PVP spring specific for use with LiPo 7.4V battery and energy <1J. Given the nature of the platform, the use of energy <1J is directly connected to the use of 7.4V LiPo batteries to avoid hang-ups in the piston stroke with this specific spring.
Platform UMAREX/VFC MP7 AEG gen1/gen2 TopMax
TopMax Processing system patent. Cylinder head made in CNC ERGAL with anti-vibration design, QUAD-RING for air sealing for the cylinder, elongated spout for perfect air sealing and 5 interchangeable rubber PADS with 5 degrees of hardness to adapt to springs and ROF diversified.
Top Max 8mm Low Profile Stainless Steel Bushings TMBC08NX / BP
TopMax Processing system patent. Cylinder head made in CNC ERGAL with anti-vibration design, QUAD-RING for air sealing for the cylinder, elongated spout for perfect air sealing and 5 interchangeable rubber PADS with 5 degrees of hardness to adapt to springs and ROF diversified and revised design with raised stop of the front O-RING.
The BLACK piston head is CNC made in DELRIN on specific measurements by TopMax Elaborazioni. The incredibly low weight of 3.03 grams net and the DELRIN structure make this piston head reliable, durable and incredibly suitable for any type of configuration. The BLACK piston head is made with axial half-body vacuum holes
Spring RCS Top Max
The central stabilization narrowing allows the spring to maintain a more linear and rectilinear position inside the air unit, minimizing lateral displacements and maximizing the life span of the spring, moreover the constant performance of the RCS spring allows to obtain a firmer shot.
The V2 EVO pusher shaft! of TopMax Elaborazioni is made of a multi-polymer compound, industrially molded and mixed with other additives, in specific percentages provided by TopMax Elaborazioni. The multi-polymeric compound used makes the final product resistant, solid, flexible, long lasting and light, furthermore it makes the product extremely performing on any type of preparation and ensures the right degree of elasticity and stiffness at the same time. The dimensions and characteristics of the pusher shaft are such as to guarantee the best possible smoothness inside the GearBox compared to other similar products on the market.
The size of the nozzle allows to increase the smoothness and air tightness on the cylinder head spout compared to other similar products on the market
TopMax Processing system patent. Cylinder head made in CNC ERGAL with anti-vibration design, O-RING for air sealing for the cylinder, elongated spout for a perfect air seal and interchangeable rubber PAD
Platform UMAREX/VFC MP7 AEG gen1/gen2 TopMax
The SUNPOWER piston head is CNC made in DELRIN on specific measurements by TopMax Elaborazioni. The DELRIN structure makes this piston head reliable, long-lasting and incredibly suitable for any type of configuration. The SUNPOWER piston head is made with axial-internal anti-vacuum holes and radial outlet holes, which allow for better distribution of the air on the sealing O-RING, speeding up its expansion in the compression phase. The size and position of the radial holes is specifically designed to obtain an optimal compression phase of the O-RING while maintaining stability, constancy and precision in the pull.
Platform UMAREX/VFC MP7 AEG gen1/gen2 TopMax