FPS Full self lubricating bushes in 9 mm steel B9FH
9 mm self-lubricating CNC steel bushings for High Cycle Fire Hawk G&G (B9FH).
Viewed products
9 mm self-lubricating CNC steel bushings for High Cycle Fire Hawk G&G (B9FH).
A complete assortment of high quality steel mounting rings for riflescopes. They are available in three different heights (low - medium - high). These rings are suitable for Weaver / Picatinny rail and they are available in both 30mm or 25,4mm diameter.
Get the Nimrod Lipo 7.4V 1300mAh 25C Stock Tube Type battery for airsoft replicas, perfect for fitting inside the stock tube.
G & G COMPLETE REAR CABLES AND CONTROLS FOR GEARBOX II VER.
POM plunger piston head with double o-ring and piston engagement angle adjustment (XPPA).
The new generation of FPS piston heads has been equipped with X-RING technology
POM piston head designed for high rof and to increase the silence of the replica thanks to the very small knocking surface (TPNS)
This piston head was developed thanks to the experience of Nico Saccocci of NikkSakk.Extreme.Airsoftcustom.
Extrema testa pistone antivuoto masisma gittata e tenuta
The piston head designed for the most demanding DSG and speed builds, helping achieve best results and overcome limits. Thanks to the use of 10 vents, airflow significantly increases improving sealing. The ultra-lightweight POM material together with CNC machining ensures repeatability of shots, perfect head-to-cylinder seal, high RPS ratio, and eliminates FPS drops. The adjustable AOE makes it essential for every speed build.
The lightest among those produced by the FPS for shotguns with bursts up to 25/30 shots per second.
Its adoption lightens the weight of the striking mass composed of piston and piston head with a significant reduction in mechanical stress and noise.
POM piston head designed for high rof and to increase the silence of the aeg (XPAVP)
Ergal padded piston head with double or lightened for high speed (TPAVN)
100% COMPATIBLE MARUI
100% MADE IN ITALY
100% MADE IN ITALY
The piston head designed especially for standard and high-performance builds helping you achieve the best results and overcome limits. Thanks to the use of 10 vents, airflow significantly increases improving sealing. High quality aircraft-grade aluminum CNC machining ensures repeatability of shots, the perfect head-to-cylinder seal, and high power. Together with adjustable AOE, it is essential for every build. The special weight pads included in the kit allow using heavier BBs in DMR builds.
The WHITE piston head is CNC made in DELRIN on specific measurements by TopMax Elaborazioni. The incredibly low weight of 3.27 grams net and the DELRIN structure make this piston head reliable, durable and incredibly suitable for any type of configuration. The WHITE piston head is made with axial-internal anti-vacuum holes and radial outlet holes, which allow for better distribution of the air on the sealing O-RING, speeding up its expansion in the compression phase
VFC Testa pistone antvuoto in metallo PISTON HEAD
Maxx Model, CNC aluminum piston head with double oring bearing to improve the performance of your electric ASGs
The BLUEPOWER piston head is CNC made in DELRIN on specific measurements by TopMax Elaborazioni. The DELRIN structure makes this piston head reliable, long-lasting and incredibly suitable for any type of configuration. The BLUEPOWER piston head is made with axial-internal anti-vacuum holes and radial outlet holes, which allow for better distribution of the air on the sealing O-RING, speeding up its expansion in the compression phase. Compared to the REDPOWER piston head, in the BLUEPOWER the size and position of the radial holes is further different to obtain greater aggressiveness in the compression phase of the O-RING while maintaining stability, constancy and precision in the shot.
The BLACK piston head is CNC made in DELRIN on specific measurements by TopMax Elaborazioni. The incredibly low weight of 3.03 grams net and the DELRIN structure make this piston head reliable, durable and incredibly suitable for any type of configuration. The BLACK piston head is made with axial half-body vacuum holes
Ergal plunger piston head with double or (TPGE)
100% COMPATIBLE MARUI
100% MADE IN ITALY
The FPS ERGAL piston head is a great upgrade that will increase the efficiency of airflow through the cylinder, ensuring an air tightness never seen beforeThis piston head has ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air
made of high strength agglomerated polymer, this head is designed to meet the needs of high gusts (up to 50bb / sec) without suffering deformations due to high temperatures.
The SUNPOWER piston head is CNC made in DELRIN on specific measurements by TopMax Elaborazioni. The DELRIN structure makes this piston head reliable, long-lasting and incredibly suitable for any type of configuration. The SUNPOWER piston head is made with axial-internal anti-vacuum holes and radial outlet holes, which allow for better distribution of the air on the sealing O-RING, speeding up its expansion in the compression phase. The size and position of the radial holes is specifically designed to obtain an optimal compression phase of the O-RING while maintaining stability, constancy and precision in the pull.
Platform UMAREX/VFC MP7 AEG gen1/gen2 TopMax
The innovative X-Flow EVO Head Piston in Ertalon+mos2 (polymer) made with the CNC machining, has been designed and calibrated to the thousandth.
The RED POWER piston head is made in DELRIN at the CNC on specific measures by TopMax Elaborazioni. The DELRIN structure makes this piston head reliable, long lasting and incredibly suitable for any type of configuration.
The RED POWER piston head is made with axial-internal anti-vacuum holes and radial outlet holes, which allow a better distribution of the air on the sealing O-RING, speeding up its expansion during the compression phase.
DMAC Piston Head X-Flow EVO® IN ERGAL
The innovative X-Flow EVO Head Piston made with the CNC machining, has been designed and calibrated to the thousandth.
FPS CNC ERGAL Double O-Ring Ball Bearing AEG Piston Head (XPGE).
XPGE new version with X-RING and one piece plastic shim for AOE.
The FPS ERGAL piston head is a great upgrade that will increase the efficiency of airflow through the cylinder.
This piston head has ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB.
100% MARUI COMPATIBLE
100% MADE IN ITALY
The innovative Delirio Head Piston in Ertalon+mos2 (polymer) made with the CNC machining, has been designed and calibrated to the thousandth. Its particular concave shape without the presence of the front anti vacuum holes, ensures high efficiency during the compression phase, guaranteeing a perfect concentration of the air flow so as to be pushed and routed directly into the nozzle of the cylinder head, avoiding the formation of air vortices
POM plunger piston head with double o-ring and piston engagement angle adjustment (XPPA).
The new generation of FPS piston heads has been equipped with X-RING technology